The Epilog Zing 16 provides a 16" x 12" work area with the highest-quality engraving. The small format, low cost, high quality laser system by Epilog Laser is compact, but there is no skimping here - all metal chassis, high-end components, and the engraving quality that Epilog Laser is known for. All of this, and Made in the USA too!
The Zing 16 desktop laser is Epilog's smallest format, high-quality laser engraver and cutter. Whether you're looking for your first laser to start out in the engraving and cutting industry, or adding a second laser to your line, the Epilog Zing 16 is a great choice with it's excellent engraving quality, compact size, and low price.
Designed with features that work together to provide you with great engraving and cutting quality and an economical price.
Full list of features can be found on the Zing Laser Series features page.
The Zing's high-speed stepper motors provide high-resolution engraving and cutting quality. With the Zing you'll see the high-quality engraving for which Epilog is famous.
Lenses rated to 500 watts can last the entire life of the system, saving you time and money.
The Zing's Red Dot Pointer provides a visible laser beam for setting up projects and to see exactly where the laser will fire. Project layout has never been easier!
User-friendly print driver allows you to control all of the laser's features from one interface.
All Epilog Zing laser systems come standard with a high-speed, 10 Base T-Ethernet connection as well as USB.
All-metal tube design provides higher beam quality and longer life with low recharge costs.
Designed with features that work together to provide you with great engraving and cutting quality and an economical price.
The Vector Cutting Grid on the Epilog Zing laser is used to lift materials being cut above the work surface. This allows the laser beam to pass cleanly through the material you are cutting and dramatically reduces underside reflections.
The air space below the vector grid is connected to the exhaust, so smoke is removed not only from the top side of the material, but also from the underside.
PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.
Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers?
Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.
Epilog Zing 16 | |
---|---|
Engraving Area | 16" x 12" (406 x 305 mm) |
Maximum Material Thickness | 4.5" (114 mm) |
Laser Wattage | 30 or 40 watts |
Laser Source | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
Intelligent Memory Capacity | Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved. |
Air Assist | Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. |
Laser Dashboard | The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages. |
Red Dot Pointer | Since the laser beam is invisible, the Red Dot Pointer on Epilog's Zing Laser allows you to have a visual reference for locating where the laser will fire. |
Relocatable Home | When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Zing Laser. |
Operating Modes | Optimized raster, vector or combined modes. |
Motion Control System | High-speed micro stepper motors. |
X-Axis Bearings | Shielded Roller Bearing Assembly on a Ceramic Coated Aluminum Guide Rail. |
Belts | Advanced B-style Kevlar Belts. |
Resolution | User controlled from 100 to 1000 dpi. |
Speed and Power Control | Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color. |
Print Interface | 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8. |
Size (W x D x H) | 28.75" x 22.125” x 11.75” (730 x 562 x 298 mm) |
Weight | 95 lbs (43 kg) |
Electrical Requirements | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC. |
Maximum Table Weight | The Zing 16 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg). |
Ventilation System | External exhaust or internal filtration system is required. There is one output port, 4" in diameter. |